Desync EFT: Revised PC Setup and Launch Flow

Check the PC before changing anything

The revised DESYNC flow begins with diagnostics, not an archive or BAT file.

1. 01 Download the official DESYNC System Checker from https://www.desync.pro/checker.exe. Run it and keep the first TXT report on your PC.
2. 02 Use an official, updated 64-bit installation of Windows 10 or Windows 11. Intel/AMD processors and NVIDIA/AMD graphics cards are supported.
3. 03 Confirm that the system boots in UEFI mode. Secure Boot and hardware virtualization must be off; Legacy mode is unsupported.
4. 04 Install RuntimePack, DirectX and Microsoft Visual C++. The checker detects these components but does not install them.
5. 05 Keep the Windows taskbar at the bottom for PUBG and EFT. Its position does not matter for the standalone SPOOFER.

Do not switch from Legacy without checking the disk layout first. Ask us for help at https://hack.sale/en/contacts/.

How to read the DESYNC System Checker result

Treat the checker as a before-and-after control point. It detects settings but does not repair them automatically.

1. 06 Keep the initial report before making changes so that later restarts and spoofer runs can be compared against a known baseline.
2. 07 Address required red rows related to UEFI, Secure Boot, virtualization and Windows components first.
3. 08 Never post the TXT file in a public chat or an open support message because it includes hardware identifiers.
4. 09 When a value does not change, record the row name and a screenshot. That gives support a useful symptom instead of an undocumented retry.

The goal is to satisfy the required launch conditions, not to make every row green.

Prepare Windows and BIOS / UEFI

1. 10 Remove any third-party antivirus, FACEIT Anti-Cheat and Riot Vanguard, then restart the computer.
2. 11 In BIOS / UEFI, use UEFI mode and disable Secure Boot and hardware virtualization. Save the BitLocker recovery key first when drive encryption is enabled.
3. 12 For DESYNC compatibility, disable Hyper-V, BCD hypervisor launch, PUA, SmartScreen, real-time Defender protection and Smart App Control when that option is available.
4. 13 Enable the three ASLR settings: mandatory image relocation, randomize memory allocations and high entropy.
5. 14 Run the diagnostics again after every required restart. Do not chase a green result on every row: some checks are optional or unavailable on particular hardware.

The official explanation of each setting is at https://desync-4.gitbook.io/desync-docs/podgotovka-pk.

Open the revised loader and activate the subscription

1. 15 Open https://desync-4.gitbook.io/desync-docs/zapusk-loadera and copy the current command with the page's copy button. Do not reuse an old command from a message because the developer may replace it.
2. 16 Press Win + R, enter powershell, press Enter, paste the full command and approve the administrator prompt.
3. 17 On the first run, activate the key, close the loader completely and open it again with the same command.
4. 18 Select the product. If an initial preparation restart is requested, restart the PC, reopen the loader and continue.

A key is activated once. Entering an already used key does not start the subscription again.

Confirm readiness before EFT starts

1. 19 Complete all requested restarts and reopen System Checker after signing back into Windows.
2. 20 Place the taskbar at the bottom and confirm the required UEFI and component checks.
3. 21 Do not start EFT early: select the product and click “Launch cheat” first, then open the game.
4. 22 If the built-in spoofer is required, enable it before launch. Make that choice again after every reboot.

A fixed sequence makes troubleshooting reproducible: loader → EFT selection → product launch → game → lobby → F2.

Launch Escape from Tarkov

1. 23 Select EFT in the loader. Enable the built-in spoofer only when needed; it is off by default.
2. 24 Click “Launch cheat”, open Escape from Tarkov and wait for the lobby.
3. 25 Press F2 in the lobby to inject. Open the menu with Home or Insert.

The EFT subscription spoofer runs only with the cheat and lasts until reboot. Official EFT page: https://desync-4.gitbook.io/desync-docs/produkty/eft-arena

Another session and support request

1. 26 After the game closes or fails, restart the computer and repeat the complete launch. The key does not need another activation.
2. 27 Run the spoofer again after reboot when it is needed. “Use last configuration” reapplies earlier spoofed identifiers, not the original ones.
3. 28 For a failure before the game opens, verify the live command and administrator rights. For a lobby failure, state whether F2 responded.
4. 29 Change one troubleshooting setting at a time, restart and check again instead of changing several variables together.
5. 30 For a recurring error, send us the order number, screenshot, exact wording, steps and a video: https://hack.sale/en/contacts/.
6. 31 If the loader runs, enable logging, restart it and only then reproduce the issue and submit the logs.

A public message does not need the key or hardware identifiers. Share only the materials requested by hack.sale support.