Desync PUBG: Revised PC Setup and Launch Flow

Check the PC before changing anything

The revised DESYNC flow begins with diagnostics, not an archive or BAT file.

1. 01 Download the official DESYNC System Checker from https://www.desync.pro/checker.exe. Run it and keep the first TXT report on your PC.
2. 02 Use an official, updated 64-bit installation of Windows 10 or Windows 11. Intel/AMD processors and NVIDIA/AMD graphics cards are supported.
3. 03 Confirm that the system boots in UEFI mode. Secure Boot and hardware virtualization must be off; Legacy mode is unsupported.
4. 04 Install RuntimePack, DirectX and Microsoft Visual C++. The checker detects these components but does not install them.
5. 05 Keep the Windows taskbar at the bottom for PUBG and EFT. Its position does not matter for the standalone SPOOFER.

Do not switch from Legacy without checking the disk layout first. Ask us for help at https://hack.sale/en/contacts/.

How to read the DESYNC System Checker result

Treat the checker as a before-and-after control point. It detects settings but does not repair them automatically.

1. 06 Keep the initial report before making changes so that later restarts and spoofer runs can be compared against a known baseline.
2. 07 Address required red rows related to UEFI, Secure Boot, virtualization and Windows components first.
3. 08 Never post the TXT file in a public chat or an open support message because it includes hardware identifiers.
4. 09 When a value does not change, record the row name and a screenshot. That gives support a useful symptom instead of an undocumented retry.

The goal is to satisfy the required launch conditions, not to make every row green.

Prepare Windows and BIOS / UEFI

1. 10 Remove any third-party antivirus, FACEIT Anti-Cheat and Riot Vanguard, then restart the computer.
2. 11 In BIOS / UEFI, use UEFI mode and disable Secure Boot and hardware virtualization. Save the BitLocker recovery key first when drive encryption is enabled.
3. 12 For DESYNC compatibility, disable Hyper-V, BCD hypervisor launch, PUA, SmartScreen, real-time Defender protection and Smart App Control when that option is available.
4. 13 Enable the three ASLR settings: mandatory image relocation, randomize memory allocations and high entropy.
5. 14 Run the diagnostics again after every required restart. Do not chase a green result on every row: some checks are optional or unavailable on particular hardware.

The official explanation of each setting is at https://desync-4.gitbook.io/desync-docs/podgotovka-pk.

Open the revised loader and activate the subscription

1. 15 Open https://desync-4.gitbook.io/desync-docs/zapusk-loadera and copy the current command with the page's copy button. Do not reuse an old command from a message because the developer may replace it.
2. 16 Press Win + R, enter powershell, press Enter, paste the full command and approve the administrator prompt.
3. 17 On the first run, activate the key, close the loader completely and open it again with the same command.
4. 18 Select the product. If an initial preparation restart is requested, restart the PC, reopen the loader and continue.

A key is activated once. Entering an already used key does not start the subscription again.

PUBG pre-launch checklist

1. 19 Complete every restart required after removing anti-cheat software or changing system settings.
2. 20 Keep the taskbar at the bottom and confirm that required System Checker rows no longer block the launch.
3. 21 Close overlay software and use the current loader command instead of a saved copy.
4. 22 Decide whether the built-in spoofer is needed before launch; it is off by default and only runs together with PUBG.

This short pass separates a Windows preparation issue from a later injection issue.

Launch PUBG and inject

1. 23 Select PUBG in the loader. Enable the built-in spoofer only when needed; it is off by default.
2. 24 Click “Launch cheat”, open PUBG and wait for the lobby.
3. 25 Press F2 in the lobby. After injection, open the menu with Home or Insert.

The built-in spoofer runs only with the cheat and lasts until reboot. Official PUBG page: https://desync-4.gitbook.io/desync-docs/produkty/pubg

Later sessions and error diagnostics

1. 26 After the game closes or crashes, restart the PC, check the required settings and repeat the complete launch. Do not reactivate the key.
2. 27 If the spoofer was used, run it again after the reboot.
3. 28 When the loader does not open, first confirm the command against the official page and run PowerShell as administrator.
4. 29 When the loader opens but F2 produces no expected result, record each stage: PUBG selection, “Launch cheat”, lobby entry and the F2 press.
5. 30 If the problem returns, send us the order number, exact error text and screenshot, steps taken and a video when available: https://hack.sale/en/contacts/.
6. 31 When the loader opens, enable logging, restart it completely, reproduce the failure and send the logs with the built-in button.

Do not publish the key or checker report. An order number, symptom, screenshot and exact sequence are enough for the first support pass.