Desync
Desync Spoofer: System Preparation and Launch
This page walks you through everything the Desync Spoofer needs before it will run: an optional automated script, the manual preparation of Windows and BIOS, and the launch sequence itself. Finish all of it and you will end up with a prepared PC and a spoofer session started before the game.
Read this first
- READING THIS INSTRUCTION IS MANDATORY! If you skip parts of it, support may be refused.
- The BAT file is only a helper: it does not cover the whole procedure, so the remaining points have to be completed manually.
- Removing the antivirus, disabling protection and deleting anti-cheats is mandatory.
- A few games will only work after Windows has been reinstalled.
- Run the spoofer every single time before you open FACEIT or VANGUARD.
- A separate spoofer purchase is not required if you already bought a cheat.
Pre-launch Setup — automatic setup via BAT file
A BAT file ships with the product to take part of the preparation off your hands. Once it has done its job, steps 4–5 of the "Pre-launch Setup" section can be skipped.
- Download the BAT file.
- Put it somewhere convenient — anywhere except the desktop.
- Launch it as Administrator.
- Let the script run to the end, then reboot the machine.
The script only covers part of the process. Everything else described here still has to be done by hand.
Manual Setup
- Download the loader archive. The password for it is 123.
- Give the archive a new name and store it in a convenient folder — not on the desktop.
- Install the libraries and frameworks the software depends on: RuntimePack, DirectX, Microsoft Visual C++.
- Get rid of your antivirus, switch protection off and delete any anti-cheats — this part is mandatory. Virtual machines and sandboxes may also be removed or turned off, though that is optional. On top of that, switch virtualization off in BIOS and execute the command bcdedit /set hypervisorlaunchtype off, then reboot.
- Optionally adjust BIOS and Windows: turn ASLR on, turn Secure Boot off, and switch to UEFI if the system currently boots in Legacy BIOS mode.
- Put the Start menu back in the bottom position, the way it sits by default.
- Reboot the PC once every step above is done.
BE / EAC / VANGUARD / FACEIT Spoofer — first-time setup only
- Start the spoofer.
- Wait — the machine reboots on its own.
- Once Windows is back up, continue from point (1) of the main steps below.
Main steps
- Open the cheat loader.
- Activate your key — this is needed on the first run only.
- Close and start the loader again.
- Pick "Spoofer" and press "Start Cheat".
- For FACEIT / VANGUARD a prompt about an upcoming restart appears — accept it.
- Launch the game and play.
FAQ
What is the password for the loader archive?
The archive opens with the password 123. Rename the archive after downloading and keep it in a folder of your choice — just not on the desktop.
Can the BAT file replace the manual setup?
No. The script handles part of the preparation and lets you skip steps 4–5 of the "Pre-launch Setup" section, but every other point in the guide still has to be carried out by hand. Run the file as Administrator, wait until it finishes, then restart the PC.
Which components have to be installed before launch?
Three things are listed as required: RuntimePack, DirectX and Microsoft Visual C++.
How do I disable the hypervisor?
Turn virtualization off in BIOS and run the command bcdedit /set hypervisorlaunchtype off, then reboot the computer.
Do I have to run the spoofer every session?
For FACEIT and VANGUARD, yes — always start the spoofer before launching those. Select "Spoofer" in the loader, press "Start Cheat" and confirm the restart prompt when it appears.
Do I need to buy the spoofer separately?
No. If a cheat has already been purchased, a separate spoofer purchase is not needed. Note also that some games require a Windows reinstall before things will work.