hack.sale
RU EN

Euphon

EUPHON Internal Full: Valorant setup

Register at blossom.re, authorize with Authenticate and allow time for injection into Valorant. Use WARP for loader access only and turn it off before the game.

Compatibility

  1. The source supports Intel and AMD, Windows 10 excluding old 2019 builds, and Windows 11 22H2–25H2. Windowed, borderless and fullscreen modes are supported.
  2. HVCI / Core Isolation is supported and need not be disabled using a generic guide. There is no built-in spoofer or TPM/VGC/VGK bypass.
  3. Stream Proof is unavailable, so the menu can appear in recordings. Check Vanguard requirements and HWID status separately before purchase.

Runtimes and connectivity

  1. Install Visual C++ 2015–2022 from https://aka.ms/vs/17/release/vc_redist.x64.exe and, where needed, https://aka.ms/vs/17/release/vc_redist.x86.exe, then restart.
  2. DirectX End-User Runtime: https://www.microsoft.com/en-us/download/details.aspx?id=35. Deselect the optional Bing Bar. Use WinRAR or 7-Zip to extract the loader.
  3. If your network cannot reach blossom.re or authentication, the source suggests WARP: https://one.one.one.one/. Alternative reference project: https://github.com/Flowseal/zapret-discord-youtube/releases
  4. Turn WARP/VPN off after download and authorization, before opening Valorant. The loader-access network setup should not be carried into the game.

Account and loader.exe

  1. At https://blossom.re/, fill Username, Email, Password and Invite key using the key from your order.
  2. Enter the key in Dashboard and download the loader. Extract it and run loader.exe as administrator.
  3. Leave Waiting for auth request open. Select Authenticate in Dashboard and confirm OK in the key window.
  4. After Loading…, wait for Waiting for Valorant. Confirm the VPN is off and start the game. Injection can take 30 seconds to 3 minutes.
  5. DELETE toggles the menu. If injection does not occur after waiting, close both and try the alternate order: Valorant first, then the loader.

Diagnostics

  1. For a stalled Authenticate, check the key and active license, clock, outgoing HTTPS, Edge/Chrome, session cache and blocking extensions. WARP is needed only until authorization completes.
  2. For instant closure, recheck administrator rights and the adjacent folder in the same official archive. Then restart Windows and check runtimes.
  3. vcruntime140.dll, msvcp140.dll and msvcr120.dll indicate Visual C++; d3dx9_*.dll, xinput*.dll and x3daudio*.dll indicate the separate DirectX Runtime.
  4. Treat VAN9001, VAN9003, VAN-81 and other VAN codes as Vanguard errors. Check TPM 2.0 and Secure Boot on Windows 11; wait for a product update if its status is Detected.
  5. Protection software may conflict with the loader. Do not bypass a browser or antivirus threat warning; ask support to verify the file and source.

Applies to

← All guides