Mason
Mason for Arena Breakout: Infinite — launch guide
This page walks you through starting Mason in Arena Breakout: Infinite — from the graphics setting the game needs, through running the loader off a USB stick and the reboot it asks for, to the moment you are in a match with the aimbot and its hotkeys ready to use.
One guide covers every cheat from this brand — the steps are identical.
Read this first
- Both the loader run and the injection have to happen from a USB flash drive — not from the internal disk.
- As soon as the injection is done, pull the USB flash drive out of the port.
- The loader file must exist on the USB flash drive only. Any copy of it left on the PC has to be deleted (DELETE).
How to Run Cheat
Everything below assumes the loader lives on a removable drive and is started from there. Follow the steps in order and don't skip the restart — it is part of the process, not an error.
- Start Arena Breakout: Infinite, open the graphics settings and switch the display mode to "Fullscreen in window", then quit the game.
- Grab the loader from https://mason.orion-security.su/launcher, signing in with the key that was issued to you after payment.
- Start the file you downloaded as administrator. Inside the loader, pick your game from the list, click on it and press "Run".
- Let the loader finish its work. A check mark shown right before it closes means the injection went through. You will then see a message suggesting a computer restart — press "Yes" and reboot the machine.
- When Windows is back up, start the loader as administrator once more, select the game again and press "Run".
- Wait until the loader closes on its own; a check mark again means everything worked. A window with the text "Please, launch ABI" pops up — press "OK" and immediately launch the game yourself.
- Let the game load all the way to the main menu, then join a match. Hold down the right mouse button to make the aimbot work — it stays active only while the button is held.
Hotkeys (Only Aimbot)
These keys apply to the aimbot module and can be used during a match.
- F1 — Increase FOV
- F2 — Decrease FOV
- F3 — Increase smooth
- F4 — Decrease smooth
- F5 — Reset all settings
Cheat Not Working?
- Open the troubleshooting page at https://docs.google.com/document/d/1yGlugedrFyYcZmkIerPLQOd1BCboeoTIGOLe7UlECGU/edit?usp=sharing and follow the advice there.
FAQ
Why does the loader ask me to restart the computer?
The first pass through the loader ends with an information window offering a reboot. Press "Yes" and restart — after the machine boots, you run the loader as administrator a second time, select the game and press "Run" again. Only on this second pass does the "Please, launch ABI" window appear.
Can I keep the loader on my hard drive for convenience?
No. The source is explicit: the loader has to be started from a USB flash drive, and the file must not remain on the PC — delete it if a copy ended up there. The drive itself should be unplugged once the injection has finished.
Which display mode does the game need?
Before anything else, launch the game, go to its settings and set the window mode to "Fullscreen in window", then close the game. Only after that download and run the loader.
How do I turn the aimbot on in a match?
There is no toggle key. Get into a match after the game has fully loaded to the main menu, then press and hold the right mouse button — the aimbot works while the button is held.
What do F1-F5 do?
They tune the aimbot: F1 increases FOV, F2 decreases FOV, F3 increases smooth, F4 decreases smooth, and F5 resets all settings back to their defaults.
The cheat didn't start — where do I look?
Open the troubleshooting document at https://docs.google.com/document/d/1yGlugedrFyYcZmkIerPLQOd1BCboeoTIGOLe7UlECGU/edit?usp=sharing and go through the cases described there.